Patterns at the onset of electroconvection in freely suspended smectic films

We report the results of experiments on electrically driven convection that occurs in a thin, freely suspended film of smectic A liquid crystal when an electric field is applied in the plane of the film. Convection in a vortex pattern is found above a well-defined critical voltage. The film behaves as a two-dimensional isotropic liquid: neither its thickness nor the director field are modified by the flow. We present measurements of the critical voltage at the onset of convection in two experimental configurations—one which allows the injection of charges into the film from the electrodes, and one which does not. When injection is present, the critical voltage for the onset of flow increases monotonically with increasing frequency of applied field. With no injection, there is no instability at DC and the critical voltage diverges there. The nature of the flow pattern observed at onset changes with frequency. Below a certain frequency the film flows in vortices that extend over the width of the film; above this frequency the flow is confined to two lines of smaller vortices localized along the electrodes. We present a simple discussion of the mechanisms which drive the convection.     

(2 + 1) Resonance enhanced multiphoton ionization of hydrogen chloride in a pulsed supersonic jet: Vacuum wavenumbers of rotational lines with detailed band analysis for excited electronic states of HCl

A comprehensive study of the excited electronic states of HCl is reported. Using resonance enhanced multiphoton ionization ((2 + 1) REMPI) and time-of-flight mass spectrometry (TOFMS) over 120 band systems are analyzed. Supersonic jet techniques are used to prepare rotationally cold species for laser spectroscopy in the 77 000 to 96 000 cm⁻¹ region. At least 50 new electronic states are characterized as well as several features only tentatively assigned previously. A long vibrational progression consisting of 29 vibrational levels of the deeply bound V¹Σ⁺(0⁺) valence/ion-pair state is studied. We also extend the identification and analysis to high vibrational levels of low-lying Rydberg states. The assignments of [²Π_i] Rydberg state complexes are evaluated in terms of spin-orbit coupling and united-atom calculations. In several band systems, the spectra exhibit anomalous rotational line intensities and broadened linewidths which are consistent with predissociation. Multiphoton ionization with mass spectrometry permits the investigation of isotope effects as well as the appearance of fragment species associated with repulsive potential curves.     

Convergent route to the purpuromycin bisphenolic spiroketal: hydrogen bonding control of spiroketalization stereochemistry

A mild and efficient [3+2] nitrile oxide/olefin cycloaddition provided a rapid and convergent entry into precursors of bisphenolic spiroketals, a structural type unique to the rubromycin family of natural products. In addition, implementation of the premise that a hydrogen bond from the C4-OH controls the stereochemistry of the purpuromycin core resulted in moderate diastereocontrol in the spiroketalization. Spectroscopic and X-ray data of these systems have provided the first assignment of the relative configuration of purpuromycin.     

Dielectric properties of a hydrated sulfonated poly(styrene-ethylene/butylenes-styrene) triblock copolymer

The present study showed that sulfonated poly(styrene-ethylene/butylenes-styrene) (S-SEBS) triblock copolymer ionomers can be made to exhibit dielectric constants on the order of a hundreds thousand. Although they are too lossy at this point to use as dielectric materials in capacitors or as electrostrictive Maxwell effect transducer materials because of their high hydrogen ion conductivity, the results of these initial dielectric studies as a function of ion content were used to try to understand the effects of a polar plasticizer, water, on dielectric properties of the acid form of this ionomer. This was done before moving on to more tightly bound ions (rather than the hydrogen ions of the sulfonic acid groups used here) and to other polar, less mobile plasticizers (which also interact strongly with the ionic dipoles). The discovery of such high dielectric constants suggested the possibility that low dielectric loss versions of this type of polymer, as well as other members of the class known as ionomers, might find future applications as extremely high dielectric constant materials in capacitors or transducers. Experimental results for films with degrees of sulfonation on the order of 10% or more showed dielectric constants on the order of ?′ ∼ 100,000 but dielectric loss tangents near D = tan δ ∼ 0.3, when the materials were exposed to high humidity conditions. Experiments to determine the effects of water content on the material's dielectric response showed that water can easily move into and out of the films studied and that this transport behavior is strongly correlated to the relative humidity of the environment and to the degree of sulfonation. Water content, in this case, was thus the primary consideration when attempting to understand the observed high dielectric constants in films with degree of sulfonation greater than 5.5%. However, vacuum-dried films were, also, examined and observed to exhibit a dielectric constant on the order of 2 until the degree of sulfonation was greater than 11%. Above this value, the dielectric constant increased by approximately 100% to a value on the order of 4.     

Extensions of Modules over Schur Algebras, Symmetric Groups and Hecke Algebras

We study the relation between the cohomology of general linear and symmetric groups and their respective quantizations, using Schur algebras and standard homological techniques to build appropriate spectral sequences. As our methods fit inside a much more general context within the theory of finite-dimensional algebras, we develop our results first in that general setting, and then specialize to the above situations. From this we obtain new proofs of several known results in modular representation theory of symmetric groups. Moreover, we reduce certain questions about computing extensions for symmetric groups and Hecke algebras to questions about extensions for general linear groups and their quantizations.     

An Application of Branch and Cut to Open Pit Mine Scheduling

The economic viability of the modern day mine is highly dependent upon careful planning and management. Declining trends in average ore grades, increasing mining costs and environmental considerations will ensure that this situation will remain in the foreseeable future. The operation and management of a large open pit mine having a life of several years is an enormous and complex task. Though a number of optimization techniques have been successfully applied to resolve some important problems, the problem of determining an optimal production schedule over the life of the deposit is still very much unresolved. In this paper we will critically examine the techniques that are being used in the mining industry for production scheduling indicating their limitations. In addition, we present a mixed integer linear programming model for the scheduling problems along with a Branch and Cut solution strategy. Computational results for practical sized problems are discussed.     

Hollow latex particles as submicrometer reactors for polymerization in confined geometries

A method was developed for free‐radical polymerization in the confines of a hollow latex particle. Hollow particles were prepared via the dynamic swelling method from polystyrene seed and divinylbenzene and had hollows of 500–1000 nm. So that these hollow poly(divinylbenzene) particles could function as submicrometer reactors, the particles were filled with a monomer (N‐isopropylacrylamide) via the dispersion of the dried particles in the molten monomer. The monomer that was not contained in the hollows was removed by washing and gentle abrasion. Free‐radical polymerization was then initiated by γ radiolysis in the solid state. Transmission electron microscopy showed that poly(N‐isopropylacrylamide) formed in the hollow interior of the particles, which functioned as submicrometer reactors. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 5706–5713, 2004     

Development of a novel approach for the production of dried genomic DNA for use as standards for qualitative PCR testing of food-borne pathogens

As part of a multi-centre European project, FOOD-PCR, the feasibility of a novel approach for production of dried bacterial DNA that could be used as certified reference materials (CRM) was assessed. Selected strains of Salmonella typhimurium, Listeria monocytogenes, Escherichia coli O157, Campylobacter jejuni and Yersinia enterocolitica were used to produce genomic DNA (gDNA). These preparations gave support to method development for qualitative polymerase chain reaction (PCR) detection methods for food-borne pathogens. Purified gDNA was transformed into stable and dry gDNA by using polypropylene vials as carrier and applying a vacuum-drying technique. The gDNA preparations were shown to be sufficiently stable under ambient transport conditions without cooling and proved to have long-term stability at 5°C of at least 22 months. The dried DNA was easily reconstituted by addition of distilled water then gentle shaking. These studies have shown that production of stable and dry bacterial gDNA material is feasible and could help satisfy the increasing need for certified reference DNA positive control samples in the field of PCR testing for detection and verification of food-borne microbial pathogens.